
Change the Reversible Door
The refrigerator is supplied with the door hinges on the right side. If you wish to change the
opening direction, follow the instructions below:
Warning!
When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
Tip:
Food in the fridge should always be covered or packaged, to prevent drying and tainting of other
food.
The following are suited for packaging:
Polyethylene airtight bags and wraps
Plastic containers with lids
Special plastic covers with elastic
Aluminium foil
Remove the three screws at the
rear and the two screws at the
top of the Larder Fridge and
remove the lid.
Use an 8mm spanner to remove
the bolts from the top bracket.
Lift the hinge bracket out of the
recess in the door.
Remove the pin from the
bracket with a 10mm
spanner/socket. Replace in the
same hole through the other
side. Remove the door.
Lay the Larder Fridge backward.
Remove the bottom hinge
bracket using an 8mm socket or
spanner.
Remove the pin and replace on
the opposite side using a 10mm
socket or spanner. Reattach
bottom bracket to the Larder
Fridge. Replace leveling feet.
Stand upright and replace door.
Commenti su questo manuale